Expobar Brewtus IV-P (Reservoir and Plumbable)
As low as $1,849.00
As one the World’s first commercial grade dual boiler engineered for the home, this latest version is a result of a further mastering of the legendary Brewtus machine. This version of the Brewtus allows you to plumb the machine directly into a water line or draw water from the internal reservoir. The Brewtus IV’s 2 heavy duty copper boilers are independently operated to provide superior temperature stability and steam pressure.
The Expobar Brewtus IV features a Gicar PID (Proportional-Integral-Differential) controller, which very accurately controls the brew temperature to ensure extremely consistent in the cup results. It also will allow you the change the brewing temperature so it will better match the profile of the coffee you brew.
A exclusive design that Expobar has always had on the Brewtus is that the brew boiler receives preheated water from a heat exchanger in the steam boiler. And it also uses the largest brew boiler of our prosumer offerings. With preheated water feeding the brew boiler and the E61 brew group, the Brewtus will give unmatched temperature stability and control. Both boiler are insulated. Since this Brewt of machine can be plumbed it has also been designed with taller legs and has to ability to be run to a drain line.
The best of espresso can be enjoyed thanks to the Brewtus IV’s specially-designed chrome-plated brass E61 Brew Group, which ensures excellent temperature control. Its state-of-the-art thermo siphon system circulates hot water from the boiler to the group head in order to prevent temperature variations and maintain proper brewing conditions. And with the brew group’s hollow pre-infusion chamber, water is dispersed evenly through the coffee grounds for exceptional coffee extraction.
Brew pressure is created by the commercial grade Ulka pump with brass outlet. It also has an air remover so it will not have an priming issue. The OPV (Over Pressure Valve) is also on the outlet of the pump and is used to control the brew pressure. The OPV is located behind the drip tray and it can be used to make brew pressure adjustment. .
For commercial grade steaming and frothing capabilities, you can never go wrong with the Expobar Brewtus IV. The ‘No-burn’ steam wand has been carefully insulated seriously reduce the heat transferred to the wand.. And for the ultimate convenience, this machine has a separate hot water dispenser, which is, like the steam wand, mounted on a ball joint making it easy to accommodate different cup and pitcher sizes.
Another way this machine caters to your own personal preferences is the Brewtus’ steam boiler switch and the brew boiler shut-off option: if you’re only pulling a shot and do not need to steam or dispense hot water, you can just operate the brew boiler by switching the steam boiler off; and if you only want to use the steaming and hot water dispensing functions, you can turn off the brew boiler, resulting in quicker warm-up time and yielding lower operating costs.
Rest assured, with its super heavy duty stainless steel housing, it’s pretty hard for this machine to ever be externally harmed, even during a precarious shipping process.
- Double-spout 58mm commercial grade portafilter handle
- Single-shot filter basket
- Double-shot filter basket
- Rubber back flush disc
- Coffee scoop
- Warranty: 1 year parts and labor warranty
- Dual Boiler with heat exchange feed technology, which circulates fresh water between the two boilers through the heat exchanger in the steam boiler
- PID Controller, designed exclusively for the Exposer Brewtus, that displays brewing temperature and used to adjust boiler temperature
- Brew Pressure Gauge that displays the machine’s current brew pressure
- Brew Boiler Shut-Off Option that allows you to only use the steaming and hot water dispensing functions of the machine
- Steam Knob that determines steam pressure emitted through steam wand
- Dedicated "No-burn" Steam Wand that remains cool to the touch, even when it is in use
- Commercial grade Faema E61 Brew Group with Expobar’s proprietary pre-infusion chamber that allows hot water to be evenly distributed through coffee grounds
- High-Efficiency Boiler insulation
- Commercial grade ANSI 304 stainless steel housing
- 90-ounce reservoir where water for brewing and steaming operations is drawn
- Low water level automatic shut-off
- 1200 Watts at 115V, 15 Amp
- Weight: 67.9 lbs
- Dimensions: 10.5 x 17.5 x 15.25 inches